How to use a Canon camera imaging station

From The New York Botanical Garden
Revision as of 21:27, 18 March 2016 by Kwatson (talk | contribs)
Jump to navigation Jump to search

Overview

This page contains information for first-time digitizers who would like to photograph specimen sheets using a Photo-eBox inside the Herbarium Digital Imaging Center.  Below are step-by-step instructions for getting started and selecting new-user preferences specific to software installed at a Canon camera imaging workstation.  Detailed equipment specifications can be found on on the XXX page.


Getting started

Turn on Photo-eBox

  • Power on the Photo-eBox by pressing the green power switch only. If there is no green switch, flip the switch on the far right side of the front panel.
  • Please, do not touch the other switches or knobs. 
  • Allow the lights to warm up for ±3 minutes before you begin photographing specimens.
File:ClipCapIt-160314-164619.PNG

Turn on Computer

  • Log in using your NYBG user name and password. If you do not have an NYBG user account, please log in as a visitor (visitor/Visi3tor).
  • If you do not already have a folder in the Public Pictures directory on the computer hard drive, please create one as follows:
  1. Using Windows Explorer, navigate to C:\Users\Public\Pictures
  2. Within "Public Pictures" create a new folder
  3. Rename the new folder with the digitizer's First then Last name
File:ClipCapIt-160316-092416.PNG:File:ClipCapIt-160316-092426.PNG

Using a Canon Camera Station

Start camera and software

Wake up the Canon camera by gently pressing the shutter button half-way down.  The camera is continuously powered on but hibernates when inactive. Numbers on the LCD screen as shown below indicate the camera is active.  Please do not swich "OFF" the camera at the end of your session. 

File:ClipCapIt-160315-155704.PNG::File:ClipCapIt-160315-160613.PNG



Any imaging workstation equipped with a Canon camera will have two software applications installed and ready for use on the computer's desktop: 

  • EOS Utility is used for remote camera control and shooting from the computer. First-time users must first select certain "preferences" before s/he may begin digitizing specimens. 
  • Digital Photo Professional is used to view raw image files captured with the Canon camera.


EOS Utility should open automatically when the camera is activated. If it does not, open the software from the computer desktop.  A window like the one below will open.  Select "Camera settings/Remote shooting." 

File:ClipCapIt-160315-164328.PNG


Select "Preferences"

The "Camera Settings and Remote Shooting" interface allows the user to change camera settings and press the shutter release button from the computer.

  • Select "Preferences..."
  • Do not change any camera settings without the assistance of the Digital Asset Manager. They have been pre-selected according to the lighting conditions specific to each workstation.
File:ClipCapIt-160316-105532.PNG




Basic

Destination Folder

File Name

Linked Software

Time settings

Image Capture

Take your first picture

Once all preferences have been selected, you are ready to take your first picture.

  1. Press the spacebar or the shutter release button on the EOS Utility interface to take a picture.
  2. Digital Photo Professional will open automatically. Navigate to your folder to view your images.

Rotate images

Images for first-time users will be oriented horizontally or in landscape view.  All images must be oriented vertically or in portrait view prior to post-processing.  

  1. Change the orientation of future images by pressing the "rotate" button File:ClipCapIt-160317-085258.PNG on the EOS Utility interface 3 times (or 1 time for every turn 90° clockwise).
  2. Take another picture to confirm new images will be captured vertically or in portrait view.  EOS Utility will save and retain this orientation for returning users.


Delete images

Delete any images you do not want to submit for post-processing.  

  1. Select the image(s).  Selected images will have an orange border and/or be shaded a darker gray than the others.
  2. Press the "Delete" key, or right-mouse-click and select "Delete".
  3. Select "Yes" when asked, "Are you sure you want to move file to the Recycle Bin?"
File:ClipCapIt-160317-105954.PNG


Check Focus and Exposure:

Check the first image for good focus and proper exposure.  

  1. Double click on any thumbnail to view the image at 50% magnification. Double click again anywhere on the image to view it at 100% magnification.
  2. View the heading of the collection label at 100% magnification to check focus.  If image is out of focus, contact Kim Watson.
  3. View the color target at 100% magnfication to check exposure. The RGB values should be in in the range >215 and <235.  If they are not, contact Kim Watson.

Finishing an imaging session

Retrieved from "https://sweetgum.nybg.org/wiki/index.php?title=How_to_use_a_Canon_camera_imaging_station&oldid=819"